TOCA – Tools Of Crestal Approach
Made for a crestal approach sinus elevation technique
This surgical procedure is more delicate than the lateral or the dual approach. Thus it is less harmful and considered to be safer for the patient.
With a crestal approach, the postoperative complications are reduced
The reamers have a round top to prevent any possible damage to the sinus membrane. There are stoppers for the reamers to give more control.
22 Pcs Kit
DSI TOCA Kit is a perfect alternative for lateral or osteotome approaches, safer and far less harmful for the patient with a faster recovery. It also saves you chair time thanks to the perfectly designed and carefully chosen tools.
Features:
• Safely and rapidly lifts the sinus membrane while drilling.
• a Stopper system prevents over-drilling into the sinus cavity.
• Bone Carrier System for transferring and filling bone material.
• Diamond titanium-nitride coated reamers
• Compact and complete, no need for additional tools or units.
Safe for the patient, will not harm the membrane and speed up the healing process.
TOCA Kit Contents:
Bone Packer
Double-sided Ø1.0mm / Ø2.2mm for delivering and compressing the graft material
Bone Delivery Syringe
Can be used with any graft material, deliver the bone matter to the site without any complications, intuitive use, no need of any additional instruments
Depth Gauge: Used to measure the exact depth of the site.
Sensor Gauge: Ø2.0mm. Check if sinus membrane is perforated
Guide (Pilot) Drill
This Ø2.0mm dril is commonly used to mark an accurate point before starting the drilling sequence.
Crestal Reamers (4pcs)
Used for perforation of the sinus interior wall during the crestal approach
The round end tip design allows it to elevate the sinus membrane without harming it.
4 diameters:
Ø2.3mm, Ø2.8mm, Ø3.3mm, Ø3.7mm
Recommended RPM 800~1200
Diamond Reamer (3pcs)
Cleans granulation tissue and soft tissue quickly in safety after extraction.
Makes a roll of initial guide when bone is thin or residual bone is very near the membrane.
3 Diameters: Ø2.0mm, Ø2.8mm, Ø3.3mm
Recommended RPM: 800~1200
Crestal-Stoppers (10pcs) to prevent excessive perforation with a crestal approach.
Color coded for more intuitive use.
Heights: 3~12mm
Ratchet Wrench
Ratchet and Motor Mount adapters
Product name: TOCA Crestal Sinus Kit
Code: SD-TOCA
