A cordless LED curing lamp for flexible use that can be taken from one room to the other. Thanks to its high performance level and the long-lasting lithium-ion battery, it will run for 240 cycles of 10 seconds each in succession. Its output can be checked thanks to the built-in radiometer. starlight uno can be relied on to harden a 2-mm thick layer in only 10 seconds and is extremely light (only 77 g). It provides a choice between two operating modes: “Fast-Curing” and “Slow Rise” (soft start).
starlight uno – white
- starlight uno handpiece
- starlight uno charger
- optical protection
starlight uno – yellow
- starlight uno handpiece
- starlight uno charger
- optical protection
starlight uno – grey
- starlight uno handpiece
- starlight uno charger
- optical protection
starlight uno – turquoise
- starlight uno handpiece
- starlight uno charger
- optical protection
starlight uno – light blue
- starlight uno handpiece
- starlight uno charger
- optical protection
starlight uno -violet
- starlight uno handpiece
- starlight uno charger
- optical protection
LIGHT SPECTRUM
starlight lamps are effective on camphoroquinone, used as photoinitiator in 98% of the materials on the market. They emit light on a wave-length comprised between 440 nm and 480 nm with a peak at 460 nm.
OPERATING MODES
- „Fast“ mode: 10 seconds at maximum light intensity, with acoustic signal at the beginning and at the end of the cycle
- „Slow rise“ mode: 20 seconds with a progressive increase of the light intensity reaching the peak within the first 3 seconds, one acoustic signal after 10 seconds and one at the end of the cycle
LOW TEMPERATURE
it does not require a fan as it develops no heat – silent
HYGIENE
the smooth, continuous and compact surface enables perfect disinfection
PROCESSOR CONTROL
constant light power regardless the charge level
LOW BATTERY WARNING
the double acoustic signal is activated when the battery is still sufficient for 6 cycles
TECHNICAL SPECIFICATIONS
| Device compliant to Dir. 93/42/CEE: | Class I |
| Class according to IEC/ EN 60601-1: | II Type B IP 20 (recharging unit) IP 20 (handpiece) |
| Power supply voltage: | recharging unit: 100-240 Vac 50/60 Hz 15 VA handpiece: lithium-ion battery, 3.6 V 840 mAh |
| Charging time: | About 4 hours |
| Handpiece for intermittent operation: | 60 sec ON 60sec OFF Max 3 times running |
| Light source: | High-luminosity LED with optics Class 2 M (IEC 62471) LEDs Dominant wavelength: 440 – 465 nm LED light emission: > 1.500 mW/cm2 Average life: 1,800,000 cycles, 20 seconds each |
| Exposure: | Fast: Exposure time 10 seconds – Acoustic signals indicating start and end of exposure Slow rise: Exposure time 20 seconds – Acoustic signal at the start, after 10 seconds and at the end of the 20 seconds The cycles can be stopped or repeated at any time |
| Operating conditions: | from +10°C to +35°C Relative humidity from 45% to 85% Pressure of air P: 800hPa/1060hPa |
| Transport and storage conditions: | from -20°C to +40°C Relative humidity from 45% to 85% Pressure of air P: 500hPa/1060hPa |
| Weights and sizes | Recharging unit: Weight 108 g L – W – H 93 x 93 x 40 mm Starlight uno handpiece: Weight 77 g L 190 mm, max. Ø 21 mm |
| Warranty | device 3 years battery excluded |