A cordless LED curing lamp for flexible use that can be taken from one room to the other. Thanks to its high performance level and the long-lasting lithium-ion battery, it will run for 320 cycles of 10 seconds each in succession and recharging takes only 120 minutes. Its output can be checked thanks to the built-in radiometer. starlight pro can be relied on to harden a 2-mm thick layer in only 10 seconds and is extremely light (only 105 g). It provides a choice between two operating modes: “Fast-Curing” and “Slow Rise” (soft start).
starlight pro – white, shiny
- starlight pro handpiece
- starlight pro charger
- 8 mm optical fiber, black with metal click-clack connection
- optical protection
starlight pro – yellow, shiny
- starlight pro handpiece
- starlight pro charger
- 8 mm optical fiber, black with metal click-clack connection
- optical protection
starlight pro – silver
- starlight pro handpiece
- starlight pro charger
- 8 mm optical fiber, black with metal click-clack connection
- optical protection
starlight pro – black, matt carbon fiber optic
- starlight pro handpiece
- starlight pro charger
- 8 mm optical fiber, black with metal click-clack connection
- optical protection
IGHT SPECTRUM
starlight lamps are effective on camphoroquinone, used as photoinitiator in 98% of the materials on the market. They emit light on a wave-length comprised between 440 nm and 480 nm with a peak at 460 nm.
OPERATING MODES
- „Fast“ mode: 10 seconds at maximum light intensity, with acoustic signal at the beginning and at the end of the cycle
- „Slow rise“ mode: 20 seconds with a progressive increase of the light intensity reaching the peak within the first 3 seconds, one acoustic signal after 10 seconds and one at the end of the cycle
TECHNICAL ADVANTAGES
OPTICAL FIBRE
sterilizable, coherent, fibre optics conductor, Ø 8 mm
CLICK-CLACK CONNECTION
exclusive connection in metal ensures an optimal light beam transmission
OPTICAL PROTECTION
sterilizable, simple to apply to the optical fibre
LOW TEMPERATURE
it does not require a fan as it develops no heat – silent
HYGIENE
the smooth, continuous and compact surface enables perfect disinfection
PROCESSOR CONTROL
constant light power regardless the charge level
LOW BATTERY WARNING
the double acoustic signal is activated when the battery is still sufficient for 6 cycles
CHARGING STATION
- green control LEDs indicating mains supply and signalling consent for charging process and power output
- in case of problems a yellow LED will flash
RADIOMETER
- integrated radiometer which checks the power output
- result indicated by a LED
ACCUMULATOR
lithium-ion battery with no memory effect
CHARGING TIME
only 90 minutes
CAPACITY
320 cycles with 10 seconds
TECHNICAL SPECIFICATIONS
| Device compliant to Dir. 93/42/CEE: | Class I |
| Classification as per EN 60601-1: | II Type B IP 20 (recharging unit) IP 22 (handpiece) |
| Power supply voltage: | recharging unit: 100-230 Vac 50/60 Hz 15 VA handpiece: lithium-ion battery, 3.7 V 1100 mAh |
| Charging time: | About 2 hours |
| Device for intermittent operation: | 120 sec ON 40 sec OFF Max 3 times running |
| Light source: | High-luminosity LED with optics Class 2 M (IEC 60825-1) LEDs Dominant wavelength: 440 – 465 nm LED light emission: > 1.400 mW/cm2 Average life: 1,800,000 cycles, 20 seconds each |
| Optical fiber: | Diameter 8 mm Composition: Drawn coherent fibers surfused in transparent quartz Autoclave sterilizable (max. temp. 135°C for 20 minutes – max. 500 cycles). |
| Exposure: | Fast: Exposure time 10 seconds – Acoustic signals indicating start and end of exposure Slow rise: Exposure time 20 seconds – Acoustic signal at the start, after 10 seconds and at the end of the 20 seconds The cycles can be stopped or repeated at any time |
| Operating conditions: | from +10°C to +35°C Relative humidity from 45% to 85% Pressure of air P: 800hPa/1060hPa |
| Transport and storage conditions: | from -20°C to +40°C Relative humidity from 45% to 85% Pressure of air P: 500hPa/1060hPa |
| Weights and sizes | Recharging unit: Weight 555 g L – W – H 96 x 120 x 58 mm Starlight pro handpiece: Weight 105 g L 198 mm, max. Ø 23 mm |
| Warranty | device 3 years |