designed for the special needs of orthodontist
- cures all current materials used in orthodontics efficiently and fast
- exposure times of 5 sec and 10 seconds
- allows curing of a few brackets up to a whole quadrant, with the push of one button
starlight ortho
- starlight ortho handpiece
- starlight ortho charger
- 8 mm optical fiber, black with metal click-clack connection
- optical protection
LIGHT SPECTRUM
starlight lamps are effective on camphoroquinone, used as photoinitiator in 98% of the materials on the market. They emit light on a wave-length comprised between 440 nm and 480 nm with a peak at 460 nm.
TECHNICAL ADVANTAGES
OPTICAL FIBRE
sterilizable, coherent, fibre optics conductor, Ø 8 mm
CLICK-CLACK CONNECTION
exclusive connection in metal ensures an optimal light beam transmission
OPTICAL PROTECTION
sterilizable, simple to apply to the optical fibre
LOW TEMPERATURE
it does not require a fan as it develops no heat – silent
HYGIENE
the smooth, continuous and compact surface enables perfect disinfection
PROCESSOR CONTROL
constant light power regardless the charge level
LOW BATTERY WARNING
the double acoustic signal is activated when the battery is still sufficient for 6 cycles
CHARGING STATION
- green control LEDs indicating mains supply and signalling consent for charging process and power output
- in case of problems a yellow LED will flash
RADIOMETER
- integrated radiometer which checks the power output
- result indicated by a LED
ACCUMULATOR
- lithium-ion battery with no memory effect
- charging time only 120 minutes
- capacity of 640 cycles with 5 seconds
TECHNICAL SPECIFICATIONS
| Device compliant to Dir. 93/42/CEE: | Class I |
| Classification as per EN 60601-1: | II Type B IP 20 (recharging unit) IP 20 (handpiece) |
| Power supply voltage: | recharging unit: 100-230 Vac 50/60 Hz 15 VA handpiece: lithium-ion battery, 3.7 V 1100 mAh |
| Charging time: | About 2 hours |
| Device for intermittent operation: | 120 sec ON 40 sec OFF Max 3 times running |
| Light source: | High-luminosity LED with optics Class 2 M (IEC 60825-1) LEDs Dominant wavelength: 440 – 465 nm LED light emission: > 1.400 mW/cm2 Average life: 3,600,000 cycles, 10 seconds each |
| Optical fiber: | Diameter 8 mm Composition: Drawn coherent fibers surfused with quartz Autoclave sterilizable (max. temp. 135°C for 20 minutes – max. 500 cycles). |
| Exposure: | Exposure time 5 seconds – Acoustic signals indicating start and end of exposure Exposure time 10 seconds – Acoustic signal at the start, after 5 seconds and at the end of the 10 seconds The cycles can be stopped or repeated at any time |
| Operating conditions: | from +10°C to +35°C Relative humidity from 45% to 85% Pressure of air P: 800hPa/1060hPa |
| Transport and storage conditions: | from -20°C to +40°C Relative humidity from 45% to 85% Pressure of air P: 500hPa/1060hPa |
| Weights and sizes | Recharging unit: Weight 555 g L – W – H 96 x 120 x 58 mm Starlight pro handpiece: Weight 105 g L 198 mm, max. Ø 23 mm |
| Warranty | device 3 years |