FKG Endo stands keep all instruments for canal treatment at hand in the correct order of use. Endo stands are robust. There is an Endo stand adapted for each iRace, BioRace working sequence. Adapted to individual working methods, the Freestyle Endo stand facilitates the completion of basic sequences with the
SafetyMemoDiscs (SMD) come fixed to certain instrument ranges. They are available separately, in bags or packed in SMD dispensers for greater ergonomy. When the recommendations, below are followed SMD enables optimal use of the instruments and control over metal fatigue. The SMD can be sterilized and remains attached to the
Pluggers are manual instruments with a flat tip used for vertical filling. They are available in steel or NiTi.
Ø ISO 15, 20, 25, 30, 35, 40
Taper: 2%
Lengths: 21, 25 mm
Spreaders are manual instruments with a conical tip used for lateral filling. They are available in steel or NiTi.
Taper: 2%, Ø ISO 15, 20, 25, 30, 35, 40, Lengths 21, 25 mm
Taper: 4%, Ø ISO 20, Length: 21 mm
Sensipast is the only paste filler with an automatic safety clutch that results in stress-free work.
Sensipast reacts before the restraints exceed the metal elasticity limits.
When its active part, the automatic clutch reacts before the wires can rupture. The miniature clutch is housed inside the Sensipast handle, a unique design that
Paste fillers are used for distribution of the obturation paste and sealing cement into the canal and down to the apex or for the application of calcium hydroxide as a temporary medication.
Paper points are used to dry the canals and allow better adhesion of the sealing and obturation materials. Rolled without a binding agent, the paper points are highly absorbent, rigid and flexible at the same time. They are available in a wide range of ISO sizes and packs.
Gutta Percha is a product obtained from natural latex. The chemical composition of Gutta Percha points is enhanced in particular with the addition of zinc oxide or resins.
Rolled precision points produced in accordance with the strictest hygiene standards. Rigid, they do not bend during insertion but remain flexible enough for
Clinicians now have two distinct formulations of the same proven pre-mixed bioceramic sealer to choose from. Compared to standard TotalFill® BC Sealer™, TotalFill® BC Sealer HiFlow™ exhibits a lower viscosity when heated and is more radiopaque, making it optimized for warm obturation techniques.
TotalFill® is a pre-mixed bioceramic obturation material. It is dispensed using a syringe in cases of root canal obturation and with either a syringe or as a putty when doing root repair and retrograde fillings. TotalFill® is available for two types of usage: 3D obturation Root repair needs and retrograde fills TotalFill® BC
D-Race instruments are used to remove most of the old root-filling material, such as Gutta Percha, obturators or resin-based material, from the canals.
The D-Race set consists of two NiTi files – DR1 and DR2. The first instrument, DR1, has an active tip for handling the root-filling material and is used
BioRace Basic Set is a highly reliable sequence of six instruments.
In the majority of cases, it has been found that, to achieve adequate elimination of bacteria from the root canal, the apical third of the canal should be treated with the minimum given sizes, ISO 35 or 40.
The BioRace sequence has
iRace Sequence
Thanks to their exclusive characteristics, only three iRace NiTi rotary instruments are needed to treat the majority of cases (straight, slightly curved or wide canals). The iRace sequence allows preparation up to a diameter of ISO 30/.04. With its ease of use and manipulation, it results in considerable time savings.
This sequence enables the treatment of the vast majority of root canals using just three instruments while fully respecting biological standards that have been recognized for years. The sequence of instruments has been designed in such a way that the tip is never fully engaged, thus ensuring maximum safety. For improved
